Everything You Need To Know About Air Conditioner Filters

One of the most vital parts of your air conditioning system is its filter. Without the filter, the air you breathe would be filled with pollutants, and your air conditioning system would be dirty. All air conditioning parts, from the air conditioning refrigerant to the ductwork, require a clean air conditioning filter. You also need to replace the filter from time to time to make sure you receive the very best in central air conditioning.

If you leave the air conditioning filter dirty, over time, it can lead to short equipment life, and higher energy costs since all parts of the air conditioning parts rely on each other. One part cannot work without the other part. Therefore, your cooling and heating will not be as effective as they should, and you will have to invest more money in air conditioning maintenance and air conditioning repair.

For home air conditioning systems, change the filter every month or two. The frequency should be every couple of weeks for industrial or commercial air conditioning units since they run 24 x 7. Doing this job routinely every month and not holding back until you see dust tangled on the filter of the air conditioner makes sure that you, along with your family members, enjoy a smoothly running air conditioner system as well as enjoy good health. It is not always possible to see microscopic dust particles. Therefore, if you notice a bit of dust on the filter, clean it as recommended by the manufacturer.

There are different types of air conditioning filters available out there. Therefore, the frequency at which one gets blocked versus the other is determined by the brand. The majority of air conditioner filters come in two sizes: 1.5 to 2 sq. ft. for every ton of commercial property or home capability.

Using the MERV (Minimum Efficiency Reporting Value) is the best way to determine the cleaning ability. The MERV is a rating of the efficiency of an air conditioner’s filter and is rated from 1 to 12. Always look for higher ratings as such filters are more effective in removing particles such as mold, dust, animal dander, and other allergens, and provide optimum protection for your air conditioner. Most filters trap particles whose size measures from 3 to 10 microns.

Normal types of air conditioning filters

Orthodox fiberglass disposable filters (available in 1″ and 2″ size):

They are common in most commercial air conditioning systems, small industrial air conditioners, and homes ACs. It would help if you did not clean these filters, as they are throwaway types and have a gluey coating that captures the dust. Cleaning the filter may damage its capability to remove particles by damaging the underlying meshwork and the adhesive coating. Even though they are lower in cost, they are not as effective as other air conditioners’ filters.

Pleated fiberglass disposable filters (available in 1″ and 2″ size):

Many residential and commercial settings typically use the 1″ size. These filters are made of materials whose effectiveness can vary. Usually, they are woven more densely to escalate the dirt removing efficiency. As compared to conventional filters, these have a larger surface area, leading to an increased particle trapping capability. Make sure that they are specified for your air conditioner, or they can put increased demand on your air conditioning components. Thus, the incompatibility can be counterproductive to the air conditioning system’s health and possibly lead to higher air conditioning service and maintenance costs. Your best option is to seek help from your air conditioner’s manufacturer regarding the suitable kind of filter for your system. You can also apply a filter sprayer post-cleaning and drying of the AC’s air filter.

Electrostatic filters:

Different in performance and design, as many varieties are available, it is somewhat difficult to decide which one is the most efficient. You will find them commonly advertised as allergy-free air conditioner filters. These filters, too, are available in 1″ and 2″ sizes. Air moving through the filter generates a static charge that collects any dust in it. They may require more blower power and more cleaning.

Electronic filters:

Usually wall-mounted and connected to an electrical power supply, these filters come with a pre-filter, which can trap bigger particles and needs to be cleaned twice a year.

Carbon filters:

The carbon that these filters contain can control any odor problems you might have inside the air conditioning system. They are also useful in homes with pets.

Installation of Air Conditioning Filter

When installing the suitable air conditioning filter into the unit, the filter should be placed in the proper direction as displayed by the arrow located on its face or side. Air ought to flow in the appropriate direction in the same direction as that of the arrows. This permits the filter to work properly, as the air exits the filter from the most reinforced part of the filter.

Make sure the filter fits tightly. A flawless seal is essential to stop unfiltered air from getting in and damaging your air conditioning system. The filter is useless without appropriate sizing and a perfect seal. Also, non-conventional filters may not fit your system even though they have higher efficiency. Check this with an air conditioning supply company, contractor, or air conditioning company.

Buying An Air Conditioner: What Size Should I Get?

With the heat increasing, it’s time to replace your old air conditioner, but there are so many variables to consider! Plus, when scrolling through endless options, it gets intimidating, so let’s break it down into a few key components.

The first thing to consider is what size of an air conditioner is best suited to you. This consideration might not seem important, but one of the most common financial blunders is getting the wrong size for your needs.

What Does the Wrong Size of Air Conditioner Mean?

With new, more efficient machines coming into the market regularly, it becomes impossible to get the same model when attempting to replace your AC, especially if you’ve had the same one for the last decade or so. A well — versed home comfort technician will need to come in and advise you on what best to purchase. Not calling in a consultant, or using one from a cheap, unreliable source, may result in the wrong size, leading to expensive, troubling results.

These are some of the things that can happen if you end up with an AC that isn’t precisely your fit:

1. It Won’t Cool Efficiently

An AC that’s too big will keep shutting on and off as the temperature changes, resulting in some pleasant spots, but not enough active cooling for your home temperature to be enjoyable. Since your AC also controls humidity, and an AC that’s too big isn’t running long enough, you’ll be left with clammy air that isn’t correctly cool either.

An AC that’s too small, meanwhile, will run near — continuously, laboring to cool your home, and thus using far too much power, but won’t be able to cool, simply because it’s in waters far beyond its depths.
An AC that’s suited to your needs, in comparison, will run without fluctuating or working too hard and will be able to reach and maintain the set temperature easily. An AC correctly chosen will be able to do this throughout summer without a hitch.

2. More Strain and More Breakdowns

An AC that’s too large will keep switching on and off (aka ‘short cycling’), and so it’ll exert a lot more strain on its system. This stress causes more system collapses, leading to more money and time wasted on fixing the problem.

With an AC that’s too small, there are more breakdowns also; this is because the AC is working all the time, and hence using more energy and work to run until it is simply too tired to run anymore.

An air conditioner that is exactly right for your usage, unlike the previous two, will run ceaselessly and without problems. This means that you are effectively and safely cooling your home, and you will only have to call us for repairs once in a blue moon, or the yearly tuning.

3. Spending Way Too Much on Bills

With Texas HVAC Systems that is unsuited to your needs, whether too large or too small, the electric bill you’ll have to front will be ridiculously high. This is because, whether the AC is short — cycling or running all the time, it’s using more energy than required, and, without the proper fit for your home, this becomes a very highly priced cycle.

With an air conditioner that’s the perfect size for you, you’ll be able to stay cool with a significantly lower bill. Some newer air conditioners, such as the Carrier and Lennox air conditioners, are more efficient, and function on the energy conservation principle, thereby saving you money.

4. A Much Shorter Life on Your AC

Whether your air conditioner is too big or too small, the ever-present breakdowns and repairs result in both a hike in bills and a decrease in longevity for your AC. An air conditioner should typically last between 10 and 15 years, but these will pack up much sooner, meaning having to find a replacement within a few years (if you’re lucky) of your new purchase.

Meanwhile, an air conditioner that’s correctly sized for your home can last you even beyond the 15-year mark, provided there was proper care, which means your investment indeed was a smart one.

These consequences sound terrible, and that’s because they are. To avoid them, we urge you to get a professional consultant in.

How Do You Determine the Size of Air Conditioner I Need?

When finding the right size for you, there are a few key components we look at:

1. Square Footage

Fairly self — explanatory; the larger your house, the larger your air conditioner needs to be; otherwise, it won’t reach every area. The general rule of thumb is 1 ton of cooling capacity for every 500 feet, but only going on square footage alone isn’t enough.

2. Insulation and Ductwork

Insulation keeps an area airtight and hence makes cooling more efficient. Therefore, a house with poor or no insulation has to be taken into consideration in our calculations, as does a home with faulty ductwork (as well as the general layout of the ductwork itself).

3. Weather

Summer is great, and comes with a lot of perks, but also brings sticky, humid, and sweltering days. A TX Air Conditioner needs to be able to keep your home temperate in the severe weather, which is something we also bear in mind in our calculations.

4. Greenery and Windows

Your windows play a significant role in deciding the appropriate air conditioner size. From the size of one window to the number of windows and the direction of each, all must be considered when deciding on an air conditioner. Multiple southern windows mean a warmer house during the day, and so you need a more powerful AC to combat the heating effects of the sun.

Meanwhile, a yard or garden with greenery and trees that provide shade result in an overall cooling effect, meaning a smaller or less powerful AC can also get the job done.

We make sure to take everything into account, to make sure the result is a comfortable home, with the perfect AC, without the trial and error.

Another thing to glance at is Multiple Zones. If there are or can potentially be multiple cooling zones in your home, the size of your air conditioner will change.

Save Money, Time and Hassle by Working with Marvin Baker

If you want a blissful summer spent in the ease that isn’t too heavy on your pocket, Marvin Baker is the way to go! Our evaluation will leave you with no questions or doubts, and we’ll make sure to help you find the ideal air conditioner for your home, building into a haven for the summer! We also have amazing discounts, deals, and reductions, designed to help you save as much as possible!

Heat Pumps Vs Air Conditioners

Although it is called a heat pump, this appliance can be used as an air conditioner too. It functions by transporting heat, rather than generating it (in contrast to a furnace), which is the reason it is called a dual purpose appliance. Much is often said about the efficiency of heat pumps. However, the majority of air conditioners are roughly equal, with regards to energy efficiency.

Understanding HSPF and SEER

Air conditioners are given SEER ratings for efficiency. The higher the rating, the less expensive it is to run. There’s not much difference between 26 and 23.5; however, and the efficiency varies from model to model. HSPF is another type of rating for heat pumps. According to Johnathan from onthespothvac.com: “HSPF is an acronym for ‘heating seasonal performance factor.” It informs you how efficiently the appliance heats a room. Be aware of the following efficiency rating examples, that air conditioners are typically just as good – if not better than heat pumps – based on the model you buy. The biggest difference between the examples is that air conditioners only cool your property, whereas heat pumps can warm it up.

Is Climate a Relevant Consideration With Heat Pumps?

The majority of heat pumps work best in hotter climates, with milder winters, apart from integrated units that need heat pumps for backups — like with geothermal units. We advise speaking to a NATE qualified HVAC technician, who works in your area, before choosing a heat pump. If the appliance isn’t suitable for your property, your electricity bills could be expensive. After the temperature drops too low, it is extremely difficult for a heat pump to extract heat from the atmosphere, so it might not achieve the temperature shown on your thermostat. Consequently, you might end up operating your heat pump constantly, or turning your emergency heat on round the clock during the winter. This will increase your energy use significantly.

Heat Pumps Versus Furnaces

Furnaces are more powerful heating systems and are crucial for certain cooler climates. This is because heat pumps have problems when temperatures reach roughly fourty degrees Fahrenheit. While it might sound strange, during chillier temperatures, heat pumps are meant to take heat from outside and use this to make indoor air warmer. The outdoor air might feel cold, but there’s still lots of heat available for heat pumps to work OK. However, in particularly cold areas, there’s insufficient heat outdoors to raise the indoor temperature enough to keep warm. Therefore, although heat pumps might be fine over the winter for Daytona Beach residents, people living in the Big Apple who have heat pumps might need furnaces as well, for the more severe temperatures. If you live in these cooler climates and do not have a furnace to use when the temperature reaches freezing, your heat pump might operate for hours attempting to warm your property sufficiently for comfort.

Achieving Optimum Heat Pump Efficiency

In lots of states, a heat pump can work with a geothermal system, and the source of heat is more environmentally friendly because it doesn’t burn fossil fuel. Rather, it uses the planet’s current temperature to cool and heat. This is an excellent substitute for certain northern climates. However, additional land has to be available to fit the required piping for such a system.

As far as home comfort goes, you probably won’t want other things to worry about; however, don’t forget, it is vital to weigh up the advantages and disadvantages of each cooling and heating system. By doing this, you will avoid buying a system that malfunctions when severe temperatures arise or buying a couple of systems when you could have spent less on one.

You can contact us at any time to discuss your air conditioning needs, and make sure that you select the most suitable system for your property.

Why You Should Maintain Your Furnace

Reasons to carry out Regular Furnaces Maintenance

Heating furnaces are the largest energy consumers in our homes. For instance, furnaces take a large portion of bills paid by Americans to an average of 45 percent of the total bills. There is every reason to ensure that a furnace is running efficiently and adequately thus ensuring the bills are reduced as possible. Reducing energy costs require regular furnace maintenance and checkups.

Regular checks are necessary because they detect a problem before it comes into play. However, many people wait until furnaces stop functioning due to damages. It also ensures that shopping for furnaces is done in time; hence wise decisions are made, as more time is available for considerations. Regular checkups ensure less downtime.

How to Maintain Furnaces

Cleaning and replacing furnace filters is important. Ideally, filters in the furnaces play a central role in ensuring that heat and warm air is evenly distributed within the home. Normally, filters are installed where the return ducts enter a furnace. Filters remove air particles before entering the furnace for heating. They filter all kinds of impurities contained in the air such as dust, dust mites, spores, bacterial, pet tenders among others.

However, the quality of functioning of the filters depends on their price. Cheap filters offer basic protection as they are designed to purify a more significant percentage of the air particles that flow into the furnace. On the other hand, expensive air filters provide improved air filtering services. This ensures that high-quality air is within the home good for asthmatic and allergic individuals.

Furnaces will have a low inflow of air when the airflow ducts leading the air into the furnace are impeded by dirt. Therefore, they will not operate efficiently. Cheap furnaces, thus, must be replaced within a period of 30 to 90 days. Expensive air filters can last more than three months; however, depending on the quality of the furnace. It is important to shop high-quality furnaces and always ask the manufactures recommendations or certified technicians to guide you properly before shopping.

To ensure furnaces are functionary efficient, the blower motor must be checked regularly. The heating element of the furnace heats the air until the required temperature is reached and blower motors push that air to the heat exchanger. The furnace blowers further ensure the provision of sufficient air to the air conditioning system. The air is evenly distributed within the home and ensures it has the required warmth.

The air filters are installed at the air furnace blowers. Blow motor has many essential working parts and if they are not adequately maintained, they will breakdown quickly. When furnace blowers start producing funny sounds and noise, they indicate that they have developed a problem. The faulty can be at the motor of the blower or the blower wheel.

High and shrill sounds denote that the metals are in contact and grinding each other. The metals are possibly from a blower wheel hanging free from the blower motor shaft and brawling the inside casing. Loud humming sounds denote electrical malfunctioning. Trained technicians are the right people to help in the identification of the real source of the problem, amend it before worsening, and damage the entire furnace equipment.

It is important to reduce the home heating loads by sealing all leakages leading cold air into the house. Such leakages allow in more cold air thus requiring more warm air to replace the cold air, especially during winter seasons. HVAC contractors carry out home assessments and determine such leakages that lead to heat loss. Further, the use of specialized equipment and cameras can help to identify where the problems lie within the house; therefore, carry out the appropriate steps and make improvements.

Ensuring that all household vents are free is essential. For heating furnace systems to work efficiently, the air within the house should circulate evenly throughout the system. This means that the furnace is completely functional and in operation. Again, it means the vents are clear and working efficiently. Therefore, ensuring in-house vents are open, properly adjusted to lead inflow properly, free them from furniture, boxes and other blockages is important. Closing the airflow spaces of the vents makes the furnaces struggle to deliver and finally damage earlier than expected.

For the gas furnaces, verification of the exhaust flue leading to the outside is important. Exhaust flue needs prompt attention to remove carbon monoxide, nitrogen dioxide, and sulphur dioxide impurities. Such components are found in the exhaust vents when they are not serviced well. Thus when exhaust flue blocks free inflow of air is limited and are likely to occur quickly. Additionally, such blockages can lead to health challenges such as headaches, dizziness, fatigue, collapse, death, heart problems, and unconsciousness. When such obstructions are realized, contacting a qualified technician is important.

Removing flammable objects around the furnace is also important. Usually, furnaces are installed at specific areas within the house that is the basement, crawl space, and the storage rooms. The furnaces, therefore, should not stay within other materials and objects placed around them. Flammable objects are the most dangerous. They include aerosols, gasoline, clothes, and paints. They have high chances of catching fire and burn the whole building.

Cleaning the ductwork and heating system vents is necessary. Cleaning should be done regularly and promptly to ensure that the furnaces are always in good working condition. Cleaning removes dust, paper scraps, pet hairs, and other impurities. Such impurities drastically reduce the working efficiency of the furnaces. Cleaning the furnace vents and other areas take shorter time and effort but ensure the equipment is in a perfect working condition.

Carrying regular furnace maintenance ensures that the possible damages and faults are taken care of at the right time. Efficient working furnaces reduce energy costs and ensure a steady supply of warmth within the house evenly. Furnace maintenance includes repairs, cleaning the vents, removal of objects surrounding them, reducing the heating loads, checking the functionality of the motors and fixing the furnaces vents. This will ensure reduced energy bills and extend the life of the furnace.

Why Air Conditioning is Important To Your Health

Stepping inside from the heat to an air-conditioned home or office is something we all appreciate, and air conditioning can definitely make those hot summers more bearable.

Recommended humidity levels are between 30 and 50 percent, although the humidity outdoors can sometimes reach as high as 94 percent. Think of it this way: about 7,300 litres of water will pass through the typical house, just from the humidity, according to Tarion.

And humidity at 60 percent during the winter doesn’t feel the same as 60 percent humidity in summer. It’s all to do with heat, water, and pressure interacting and RH, or relative humidity is a much more accurate indicator of how hot it really feels. Air conditioning is considered an essential investment to most of us to help cope with those high humidity level, although there are several other reasons why AC is useful.

Your air conditioner can help to offset some of the risks to your health and your property that high humidity levels can have. Air conditioning can help us on a daily basis as these five reasons indicate:

1) Preventing Damage to Your Home and Belongings

One of the priceless paintings by Raphael was actually damaged by an air conditioning unit that wasn’t working properly. Because the gallery owners just didn’t realize how important AC is, one of the world’s great works of art was badly damaged. The air conditioner that was being used in the art gallery just wasn’t able to cope with the hundreds of humid and warm bodies that were crowding around the painting, trying to get a peek at it.

Your kitchen cabinets and any sensitive items such as musical instruments and electronics should be kept away from an environment that is very humid, or one that has little humidity. The Raphael story is a good example of just how important and costly this can be. You really run the risk of damaging your furniture, clothing and other belongings if you don’t effectively monitor and regulate the humidity levels in your home. And of course, your home can lose its value over time, if it’s suffered damage caused by the humidity being too high.

2) Unwanted Guests Come With High Humidity

Pest control and humidity go hand in hand, and by lowering your humidity levels by about 50 percent, you can help prevent an infestation of dust mites.

Bugs and pests are also attracted by organic decay, which tends to increase if your humidity levels are higher. The small creatures in your neighbourhood look at your house as being a source of free food if you allow your humidity levels to increase in the summer. Once they notice those high levels of humidity, you may find it a challenge to get rid of them.

3) Toxicity and High Humidity

Formaldehyde and other potentially dangerous chemicals can seep out of your furniture and other belongings, and into the air, you are breathing. The rates at which these chemicals seep out is increased if you have higher humidity. You are probably allowing more of these chemicals into your home if you don’t have AC, and are risking your health and safety.

Mould starts to appear pretty quickly in a humid environment as it needs water to grow, and many types of mould are only present in areas that have high humidity. Many moulds are harmful to people, and even if not harmful they can be unpleasant and unhealthy.

4) Humidity Can Make You Sick

High humidity just isn’t good for your immune system. Not everyone is aware of that, although most of us know that low humidity during the winter generally isn’t the best thing for our health. It’s probably one of the most important reasons to have an air conditioner in your home.

Increased levels of mould spores floating around in the air can often lead to an adverse reaction in people, and of course, many allergy sufferers are going to find their condition worsens because of the extra pests and dirt in the air. If you have respiratory issues, an air conditioning unit is highly recommended to reduce the levels of humidity in your home, as your doctor will probably tell you.

5) Humidity Affects Your Mood

The connection between high humidity levels and a poor mood has been explored in more than one study, most notably in 1975 by Persinger. And it’s not too hard to see why this is so.

The negative experiences that are outlined above and that are all a result of humidity levels can affect people significantly and can make your life quite miserable. If your overall life is uncomfortable and inconvenient, you are obviously going to feel that much more miserable or depressed. And if you have ever been uncomfortable and miserable sitting on a hot bus with no air conditioner, you know just how true that is.

Marvin Baker Construction & HVAC

Remodeling your home is a significant investment. It has been our privilege to help hundreds of homeowners realize their dream of a beautifully remodeled HVAC system and ducts to fit their lifestyle and the architectural integrity of their home. A remodel not only improves the enjoyment and usefulness of your home, it can also add to its value if it’s time to sell or refinance. Whatever your goal, be it curb appeal or adding modern comforts and conveniences, Marvin Baker Construction & HVAC has the experience to get the job done right, with proper planning, quality workmanship and accountable project management.